Download Tools

GcProKey Total update count 41 release date 14-07-16

Unofficial support site by Welcome zone Haldwani

How To Flash Karbonn A51 Speadtrum (Pac) Flash File Stock Rom

Unofficial Support Site For This Phone By Welcome Zone haldwani

The Instructions Given Below To Flash Stock Rom Or Any Custom Rom Flash File Firmware using Smart Spreadtrum Android Flash Tool Smart Phone .

Requirements:

1=  Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.
2=  Upgrade Download Tool And Usb Drivers .
3=  USB Cable.

Flash: To overwrite your phones existing software with another.
Rom: Firmware for your phone.
.pac file: File in which research download uses

Before this it is important to have the VCOM drivers for you phone installed on your computer. (Links Below)

To start go ahead and press the first gear button. This will open up a browse menu

Use the menu to browse for where your .pac file for your phone is saved. These files are usually given
from the phones manufacture. The browse menu can only open .pac files.

Once the file is loaded you can tell, you will be able to see the name on the bar (as shown).
Next press the second gear to open up the settings menu.

1. How much to port (self explanatory)
2. Bautrate. Leave this at 115200 unless your phone manufacture said otherwise. This works for the SC6820.
3. This will be automatically selected once you load the .pac file.
4. Where all the files are stored. You can actually extract these once you load a .pac file hehe :P .
5. Name of Each file. If its ticked it will be flashed. You can untick things you dont want to be flashed.
6. This is just if your going to build a .pac file from parts, dont worry about it thats a whole other thing.

Once your dont editing the settings you can go ahead and press Ok.

After your done press the arrow like button. This will start the process and have it ready for your phone.
Take the battery out of your phone now for at least 15 seconds. Place it back and plug in the usb while
simultaneously holding the volume down button. You should see in research download that it has started
flashing! ( You can let go of the volume key now :P) When it is finished just press the stop button and
disconnect your phone!

VIDEO TUTORIAL 

Congratulation Your Flash Successfully Flash Enjoy :-

Karbonn A51	Usb Driver	Download
Karbonn A51	Flash Tool	Download
Karbonn A51	Flash File	Download
Facebook	Like This	Download

Required for flash:

• Redmi Note 2 Prime (Dual Sim 4G) Model : 2014912 device with well battery charged, and do not try with low battery
• Redmi Note 2 Prime (Dual Sim 4G) Model : 2014912 Stock ROM Firmware (tested) | Download Mirror-1, Mirror-2
• Redmi Note 2 Prime (Dual Sim 4G) Model : 2014912 USB (Flashing) OR Dead Boot Repair driver | Download here
• Redmi Note 2 Prime (Dual Sim 4G) Model : 2014912 Flash Tool | Download here
• Good Quality Micro usb cable
• Computer or Laptop

Procedure:

• First download tested Firmware, Flash tool or driver from above link (if link not working just leave your comment on below comment box i will soon fix it)
• Extract to all are zip files to desktop or as you like path (must be installed winrar software to Extract)
• Open Driver folder and choose Qualcomm_USB_Driver_Setup.exe file and wait until finish installation
• Open QPST.WIN.2.7_Installer-00430.1 folder and chose setup.exe file and open and install it
• Now open QFIL from the "C:Program FilesQualcommQPST in" path
• Tick on Flat Build option
• Go to Programmer Path and click on Browse.. button and choose prog_emmc_firehose_8916.mbn file
• Click on Load XML.. button and choose rawprogram_unsparse.xml file and second choose patch0.xml file from the Firmware folder
• Insert USB cable and wait until driver install
• After drier installed just Click on Download button and wait until finish procedure
• Congratulation you are done

GcPro Key Total update count 39 release date 26-05-16

Unofficial Support Site by Welcome Zone Haldwani

Tablets are great devices for reading and browsing websites. Using the touchpad is intuitive and convenient, and tablet screens don’t present the size limitations of mobile phones. However, with tablet web browsing, you will notice that many websites automatically load their mobile version. This is because the browser you are using identifies itself as a mobile based application to the websites you are visiting.

Change The Honeycomb Browser User Agent Setting

• Open the native browser on your Android Honeycomb tablet.
• Type about:debug in the address / URL bar and press Enter.
• Don’t expect anything to happen; it will probably look like nothing happened.
• Next, open the browser’s settings via the icon in the top right corner.

• Select Settings from the drop-down menu.
• Switch to the Debug tab via the left-hand menu.
• On the right side now select UAString.
• Select Desktop.

• Click the Back button in the bottom left corner of the browser to exit settings.
• Repeat step 2 to exit debugging mode.

Use A Different Browser