Saturday, December 31, 2016
How To Flash Karbonn a51 Speadtrum Pac Flash File Stock Rom
How To Flash Karbonn a51 Speadtrum Pac Flash File Stock Rom
How To Flash Karbonn A51 Speadtrum (Pac) Flash File Stock Rom
Unofficial Support Site For This Phone By Welcome Zone haldwani
The Instructions Given Below To Flash Stock Rom Or Any Custom Rom Flash File Firmware using Smart Spreadtrum Android Flash Tool Smart Phone .
Requirements:
1= Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.2= Upgrade Download Tool And Usb Drivers .
3= USB Cable.
Flash: To overwrite your phones existing software with another.
Rom: Firmware for your phone.
.pac file: File in which research download uses
Before this it is important to have the VCOM drivers for you phone installed on your computer. (Links Below)
To start go ahead and press the first gear button. This will open up a browse menu
Use the menu to browse for where your .pac file for your phone is saved. These files are usually given
from the phones manufacture. The browse menu can only open .pac files.
Once the file is loaded you can tell, you will be able to see the name on the bar (as shown).
Next press the second gear to open up the settings menu.
1. How much to port (self explanatory)
2. Bautrate. Leave this at 115200 unless your phone manufacture said otherwise. This works for the SC6820.
3. This will be automatically selected once you load the .pac file.
4. Where all the files are stored. You can actually extract these once you load a .pac file hehe :P .
5. Name of Each file. If its ticked it will be flashed. You can untick things you dont want to be flashed.
6. This is just if your going to build a .pac file from parts, dont worry about it thats a whole other thing.
Once your dont editing the settings you can go ahead and press Ok.
After your done press the arrow like button. This will start the process and have it ready for your phone.
Take the battery out of your phone now for at least 15 seconds. Place it back and plug in the usb while
simultaneously holding the volume down button. You should see in research download that it has started
flashing! ( You can let go of the volume key now :P) When it is finished just press the stop button and
disconnect your phone!
VIDEO TUTORIAL
Congratulation Your Flash Successfully Flash Enjoy :-
Karbonn A51 | Usb Driver | Download |
Karbonn A51 | Flash Tool | Download |
Karbonn A51 | Flash File | Download |
Facebook | Like This | Download |
Available link for download