Tuesday, December 20, 2016

Guide Install CWM Recovery For Galaxy Core

Guide Install CWM Recovery For Galaxy Core


After Installing CWM Recovery. Do Not Boot Into CWM Recovery Via Any App Like SUperUser Or RootManager It Will Cause A Recovery Loop.If You Have A Recovery Loop Follow The SECOND POST

Hey people in this thread i will show how you can install ClockworkMod Recoveryor popularly known as the CWM Recovery.Your GT-I8262 or Galaxy Core Duos Comes With Stock Recovery with Help of Which you can perform various functions like Wiping Your Device,Wiping/Clearing Cache but with help of CWM recovery you can install ROMs,Take A Nandroid Backup,Partition Your SD Card etc. So as you can see this recovery is of great use. 

Things You Require
1)CWM File
LINK
2)ODIN 3-1.87
LINK
3)Galaxy Core Drivers
LINK


Attention Before Flashing
1)Make Sure Battery Is ABOVE 30%
2)DONT UNPLUG the Cable During Flashing
3)Follow Procedure Carefully Flashing Right Files
4)No Nuclear War Is Going On :P
5)Any Other Problem PM me  


PROCEDURE

1. Install the Galaxy Core Drivers On Your Desktop

2. Extract ODIN.zip on your Desktop

3. Copy Recovery.tar File In ODIN Folder(its preferable to keep them in the same directory)

4. Now Go To Your Phone Settings

5. Click On Developer Options & Tick USB Debugging

6. Turn Off Your Phone

7. After Your Mobile Is Completely Turned Off Go Into Downloading Mode - Press & Hold Volume Down +Home Key +Power Key, Press Volume Up Again To Proceed

8. Connect Your Phone To Your PC via USB Cable

9. Now Open ODIN 3.07

10. Your Phone Should Be Detected In ODIN If You Have Installed The Drivers Correctly

11. Now Click On The PDA Button Then Select recovery.tar(CWM Recovery File)

12. Press The Start Button. Now The Installation Should Start.

13. When The Installation Is Completed It Should Display "PASS" Then Remove The USB Cable From Your Device

14. Now To Go Into CWM Recovery - Turn Off Your Phone Completely.

15. Press Power Button + Home Button + Volume Down Button.

16. Now You Have A CWM Recovery!!!!!!!!!!!!!!


2nd METHOD

If the above Method didnt work for you because some people are experiencing problems with the above method for the latest firmware so you can try this method which shall work. 

Things Required
1)A Rooted Galaxy Core
2)CWM.zip File(In Second Post)
3)Uni-init APK(In Second Post)
4)A Mind


Lets Begin


1) Download and install BusyBox.
- Open and install BusyBox.
- Done!
2) Copy »Uni-init v1.0.apk« to internal memory and install Universal Init.d.
- Please see HERE the entire instructions.
3) Download and install Android Terminal Emulator.
- Open Terminal and type following commands:
PLEASE TYPE THE COMMANDS CAREFULLY OTHERWISE YOU CAN BRICK YOUR DEVICE

Code:
su
cd /storage/sdcard0
sh cwm.sh
- Done!
4) Switch off the Phone completely.
5) Press and hold »Volume up« and »Home«, then press »Power« while "Volume up" and "Home" are held.
- Use »Volume up« and »Volume down« to navigate items and »Power« to select.


3rd Method
First Download Flash_zip from the second post and unzip it in the ADB Folder so the folder where adb files are present you have to unzip there. Now Also Download the recovery.img file from the second post and again place it where the adb files are there.So,The flash_image is within the attached zip file! Use the file within the zip file, NOT the zip file itself.Put the recovery image and the flash_image on the root of your C drive.

Lets Begin
(make sure youre in the command prompt and have changed directory to where the adb file is)

adb push c:flash_image /sdcard/
adb push c: ecovery.img /sdcard/
adb shell
su
mount -o remount, rw /system
cp /sdcard/flash_image /system/bin
cd /system/bin
chmod 777 flash_image
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p13

________________________________________________________________________________________________________________________________________________________________________________________________________________________

If You Boot Into ClockWorkMod Recovery via any app like SuperUser Or RoM MAnager or Flashify it will cause the recovery to loop. This Is The Way To Solve That Problem Follow This

1) Download And Put This Attached File In External SD

2) Install This Zip Using CWM Recovery..

3) Turn Off Your Mobile Through CWM Advanced Menu Or By Pulling Out Battery..

4) Now Enter Into Bootloader Mode Using (VOL. DOWN+MENU+POWER )

5) Reinstall CWM Recovery Using Odin..

6) Install New Roms

7)Flash Stock Firmware HERE

ALWAYS ENTER CWM THROUGH BUTTONS AND NOT THROUGH ANY APP
ATTACHED FILES
File Type: zipCWM_De_Loaper.zip - [Click for QR Code] (6.64 MB, 73 views)


Available link for download