Tuesday, November 29, 2016

Guide Flash Update Firmware Samsung GALAXY S7 EDGE SM G935F Using ODIN v3 11 1

Guide Flash Update Firmware Samsung GALAXY S7 EDGE SM G935F Using ODIN v3 11 1


[Guide] Flash / Update Firmware Samsung GALAXY S7 EDGE SM-G935F Using ODIN v3.11.1.

Flash Stock Firmware On Samsung GALAXY S7 EDGE SM-G935F. This guide show you how to flash a stock ROM on Samsung GALAXY S7 EDGE SM-G935F using Odin V3.11.1 software. Before you decide to use this guide, we recommend using Samsung’s own utilities, Samsung Kies and OTA (Over-the-air). Only use this guide if you are 100% sure about the risks involved in flashing your device. guidebelajar is not responsible for any damage caused by following this guide.

This Samsung android device is released on 2016, March. and available on USA, Global and Southeast  Asia. Samsung GALAXY S7 EDGE SM-G935F is the smartphone with 5,1 Inchi Super AMOLED capacitive touchscreen, 16M colors, work on Android OS, v6.0 (Marshmallow), with Quad-core 1.8 GHz CDual-core 2.15 GHz Kryo & dual-core 1.6 GHz Kryo CPU, Qualcomm MSM8996 Snapdragon 820 chipset, Adreno 530 GPU, combined with 4 GB of RAM and 12 MP of  Main camera and 5 MP on secondary camera. 

Flashing process in android Smartphone is like reinstall process on windows computer PC, with flash your Samsung GALAXY S7 EDGE SM-G935F android device you can unbrick, downgrade, manually upgrade (instead of updating via OTA or Samsung Smart Switch), or restore Samsungs stock firmware instead of custom ROM. I make this guide just for you as user all Samsung GALAXY S7 EDGE SM-G935F variant.

You need to read this guide carefully, so you can get the best result flashing on your Samsung GALAXY S7 EDGE SM-G935F. Cause you need to download necessary file, you must ensure that you have good internet connection in your computer device, this guide using a windows computer.

Initial Step To Flash Samsung GALAXY S7 EDGE SM-G935F 

Now, we have reached on beginning guide, so you must to do initial step to ensure everything run smoothly.
  1. Make sure your Samsung GALAXY S7 EDGE SM-G935F battery is not in a low battery state, a minimum of 80%. If the battery runs out in the middle of the Root, it can lead to failure
  2. Always perform backup your important data before flashing process, Cause this process will delete or erase the data in memory.
  3. Make sure you have installed a Latest of Driver Samsung  that support with your Smartphone, If you dont have, please download here
  4. Original USB cable driver for your Samsung GALAXY S7 EDGE SM-G935F
  5. Download Samsung Smart Switch, Here
  6. Download Odin V3.11.1, Here
  7. Download Official firmware file for the model number of your device, download it from - SamMobile, or you can visit the other site, Here

Main Guide To Flash Samsung GALAXY S7 EDGE SM-G935F 

  1. You must download all necessary file.(Samsung USB driver or Smart Switch and Odin)
  2. Then you must install all driver or samsung smart switch to your computer or PC.
  3. Extraxt Odin V3.11.1. file on the destination folder.
  4. To download Samsung firmware you must visit this link, you can download specific firmware file for your device model number. you must Log In with your registered account on this website.
    sammobile website Log In
    sammobile website Log In
  5. On the row menu at the top of page, you can select firmware.
    sammobile website GALAXY S7 EDGE SM-G935F
    sammobile website GALAXY S7 EDGE SM-G935F
  6. Then you must enter in search bar with your phone model number.
    Firmware Samsung GALAXY S7 EDGE SM-G935F
    Firmware Samsung GALAXY S7 EDGE SM-G935F
  7. Then select your country/carrier.
    select country or carrier for samsung firmware
    select country or carrier for samsung firmware
  8. Then you click on available country link.
  9. For Non-Premium member you can Select regular download.
    sammobile download non premium member
    sammobile download non premium member
  10. And Donwload button again. Approximately file size is 1,9 GB
  11. Wait untill your file finish downloaded, after that you must extract all firmware file on specific folder on your computer.
  12. This is your file.
    Flash Stock Firmware On Samsung GALAXY S7 EDGE SM-G935F
    Flash Stock Firmware On Samsung GALAXY S7 EDGE SM-G935F
  13. Switch Off your Samsung GALAXY S7 EDGE SM-G935F to start flashing process.
  14. Then, you must run Odin3 v3.11.1 by right click on Odin.exe and select Run as Administrator.
    Flash Stock Firmware On Samsung GALAXY S7 EDGE SM-G935F
    Flash Stock Firmware On Samsung GALAXY S7 EDGE SM-G935F
  15. When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file. 
    Flash Stock Firmware On Samsung GALAXY S7 EDGE SM-G935F
    Flash Stock Firmware On Samsung GALAXY S7 EDGE SM-G935F
  16. Now your firmware file has been inserted in Odin3 
    Flash Stock Firmware On Samsung GALAXY S7 EDGE SM-G935F
    Flash Stock Firmware On Samsung GALAXY S7 EDGE SM-G935F
  17. Then, Enter download mode your Samsung GALAXY S7 EDGE SM-G935F by pressing and hold Volume Down Button + Home Button + Power Button. Hold and press all button untill your phone vibrate and LCD show menu.
    download mode Samsung GALAXY S7 EDGE SM-G935F
    download mode Samsung GALAXY S7 EDGE SM-G935F
  18. And you will see picture like this on your LCD screen.
  19. Download Mode GALAXY S7 EDGE SM-G935F
    Download Mode GALAXY S7 EDGE SM-G935F
  20. On this mode, now you must connect your Samsung GALAXY S7 EDGE SM-G935F to your PC / laptop using a USB cable. 
  21. After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)
    Enter download mode samsung GALAXY S7 EDGE SM-G935F
    Port Com samsung GALAXY S7 EDGE SM-G935F
  22. Make sure re-partition is NOT ticked
  23. When everything already you can click Start Button. at the bottom left corner
  24. Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process. 
  25. When complete it will display a notification PASS and your smartphone Samsung GALAXY S7 EDGE SM-G935F will automatically restart.
  26. Wait your device to boot up, it will take a while.
  27. When your Samsung GALAXY S7 EDGE SM-G935F is ready to use, you can check your firmware update version by dial *#1234# on dial pad.
    dial pad samsung GALAXY S7 EDGE SM-G935F
    dial pad samsung GALAXY S7 EDGE SM-G935F
  28. And you will see your new firmware version.
    firmware version samsung GALAXY S7 EDGE SM-G935F
    firmware version samsung GALAXY S7 EDGE SM-G935F
  29. Finish.


  30. Warning.
    Never disconnect the USB cable while flashing process is running.
    Install Samsung Mobile Driver or Samsung Smart Switch if you dont see a sign in Odin.
    Flash your Samsung GALAXY S7 EDGE SM-G935F device at your own risk.
    Flashing firmwares which contains more than one *.tar.md5 file will wipe all data on internal storage.  Flashing official/stock firmware wont increase the binary flash nor KNOX WARRANTY VOID counter and wont cancel the Samsung GALAXY S7 EDGE SM-G935F devices warranty. 


Available link for download